Tenvis

Note: Before starting, make sure that you've port-forwarded your camera. If you're unsure how to start the port-forwarding process, take a look at our guide for some guidance. 

First you want to get your Tenvis camera on the network. Follow your camera's documentation.

Now follow the Generic MJPEG documenation to set up your camera on Camcloud.

Update Your Camera's FTP Settings!

Login to your camera by putting the camera's IP Address into your address bar.

 
On the right hand corner, click on settings, then "Alarm", then "FTP Alarm". 


Replace the FTP server, user, and password with the credentials you received from Camcloud. 


Now click on "Alarm". Under Motion Detection, make sure "IP Camera Build-in" and "Video Recording" are both checked.  


Now let's make sure it works! 

Make Sure Your Timeline Page is Getting Populated!

Go over to the Timeline page to see if any recordings were saved. The timeline will populate any event that happens with a blue bar. You can also download the clip if you'd like by clicking on the download button.


 

Whenever there's motion activity, your video and image recordings will be saved and stored in the cloud which allows you to access it from anywhere, including your Android or iOS device.

That's it for the setup!