Foscam | Camcloud

Foscam

There are many different ways to setup a Foscam camera.

Foscam H.264

This applies to cameras named 98xx/99xx series, Fosbaby, R2, C1, C2. This is the recommend approach to setup your Foscam camera.

Note: Before starting, make sure that you've port-forwarded your camera. If you're unsure how to start the port-forwarding process, take a look at our guide for some guidance.


 
Step #1. Start the "Add Camera" Wizard




First Login to 
Camcloud.com. Click on the "Timeline" tab. This is where you'll have a list of any cameras you've already setup.

Click on "Add Camera" and pick "Foscam". Choose your camera model, then name your camera whatever you'd like. 





Once you click on next, turn off "Enable P2P" (if it's a P2P camera) and you'll have to add in your camera's username, password, IP address, and HTTP port (and in some models the RTSP port as well). This means your HTTP port needs be forwarded on your router. (Note: To enable HTTP on a Foscam, go to Network -> Port, assign a port (e.g. default is 80). This is the port that must be forwarded on your router. 


 

 

Click on Next.

In the Camera Settings menu, choose the Quality you desire, your camera sensitivity and if you'd like to have email notifications. Capture Mode options are still "Images" or 30 second "Video" clips. Image appearance settings include the ability to adjust your cameras image based on your needs and the camera placement. Settings include "Flip", "Mirror", "Flip-Mirror" and the default "Normal". Once you're done, click on "Finish". 




 

Now the setup wizard will configure your chosen settings and close. Verify you are getting a live view and that motion events are coming in when triggered. 

Foscam MJPEG

This applies to cameras named 89xx series. This is the old MJPEG technology that is quite outdated. Time for a new camera yet? 

Note: Before starting, make sure that you've port-forwarded your camera. If you're unsure how to start the port-forwarding process, take a look at our guide for some guidance.

Start the "Add Camera" Wizard



First Login to Camcloud.com. Click on the "TIMELINE" tab. This is where you'll have a list of any cameras you've already setup.

Click on "Add Camera" and pick "Foscam". Choose your camera model, then name your camera whatever you'd like. 





Once you click on next, you'll have to add in your camera's username, password, IP address, and HTTP port. This means your HTTP port needs be forwarded on your router.



Click on Next.

This is where you can also change whether or not you'd like notifications, and the sensitivity of your camera's motion detection. Once you're done, click on "Finish". 


 
Now the setup wizard is going to configure your chosen settings and close. Verify you are getting a live view and that motion events are coming in when triggered. 

Foscam P2P

This is NOT the recommend approach to setup your Foscam camera.

This applies to cameras using the Foscam P2P technology. Typically the model name ends with a "P".  Instead use the Foscam H.264 option.

Start the "Add Camera" Wizard

First Login to Camcloud.com. You should see your "Timeline". This is where you'll have a list of any cameras you've already setup.

Click on "Add Camera" and pick "Foscam". Choose your camera model, then name your camera whatever you'd like. Ensure that you have your camera UID ready. The UID is labelled and found on the bottom of the camera on a sticker. Although this is the easiest way to setup a camera, it is also the least reliable. We recommend the automatic Foscam setup whenever possible.


Once you click on next, you'll have to add in your camera's username, password, and UID. 

Click on Next.

In the Camera Settings menu, choose the Quality you desire, your camera sensitivity and what you would like to have email notifications for. Capture Mode options are still "Images" or 30 second "Video" clips. Image appearance settings include the ability to adjust your cameras image based on your needs and the camera placement. Settings include "Flip", "Mirror", "Flip-Mirror" and the default "Normal". Once you're done, click on "Finish".

Now the setup wizard will configure your chosen settings and close. Verify you are getting a live view and that motion events are coming in when triggered.

 

Foscam Manual Setup

This applies to all Foscam cameras. If you want to control what settings to apply, this option is for you. However note this option is very error prone and not recommended.

#1 First, setup your camera to the cloud service.

You'll select a Foscam camera and model as usual, then at the network step turn off Auto Setup. You'll be asked either for your RTSP or HTTP port depending on the camera model. Don't forget to port foward your camera.

 

Once your done the add camera wizard will give you the FTP credentials which you'll use later. Don't worry if you lose these, you can always bring this up later in your camera menu right on the Timeline.

#2. Login to your Camera.

Enter your camera's IP address into your browser's address bar. You can download a Foscam IP utility to find the IP the camera is currently using. Now login using the camera's credentials. 

Tip: If you're having trouble logging into your camera, try using Internet Explorer as your browser. Sometimes you even need to use "compatibility mode". 

#3. It's time to update the FTP Settings.
 
Under Network, click on FTP Settings. This example is for typical Foscam H.264 cameras.

Older interfaces with the old MJPEG cameras will have a menu called "FTP Service Settings".

 

Replace the FTP server, username, and password with the information you received after setting up the camera. In the case of the newer Foscam H.264 cameras they have a strange syntax where you need to add the prefix like so: "ftp://<ftp server>". FTP Mode needs to be "PASV"

#4. Setup the Recording

Click on Alarm, then Motion Detection, and make sure "Recording" is checked.

Note: Some Foscam user interfaces may slightly differ from others depending on your camera model. For example, your interface may have "Motion Detection" under "Alarm". Another version of the interface may have Action Detection under "Detector", as seen below.

Interface #1:

or

Interface #2:

#5.  Now add the storage location

Under "Record", click on Storage Location, and make sure "FTP" is selected for Recording Location. 


In the case of the older MJPEG cameras you only need to add the Alarm Service Settings. Select “Motion Detection Alarmed” and “Upload Image on Alarm”. In terms of the Sensitivity and Upload Interval that is up to you. Play around with these numbers for your motion detection needs.

That should be it. Verify you are getting a live view and that motion events are coming in when triggered.